output 4-20 in slc 500

peppin23joe

Member
P
Join Date
Mar 2012
Location
riverside
Posts
59
Hi friens i need your help....

Anyone know slc 500 k card could be used to control an actuator output of 4-20 .... I await your thoughtful suggestions to my problem .....

I hope your comments...
 
1746-NO8I(8 Current Outputs), 1746-NO4I(4 Current Outputs) or 1746-NIO4I (2 Current Outputs).
 
Last edited:

Similar Topics

AutomationTechBrian
Modifying a SLC 500 file to change an output address.
A customer asked if I could change an output address in a SLC 500 that he thinks is bad. I've not worked with that PLC before, so I asked him to...
Replies
6
Views
2,621
I_Automation
I_Automation
S
Allen Bradley SLC-500 Output Board issues
Experts, I have an issue with an Allen Bradley SLC-500 Output Board. The PLC is going through it ladder logic correctly and the Output terminal...
Replies
13
Views
4,117
mylespetro
mylespetro
H
SLC 500 Output woes
Hello. We are having issues with a SLC 500 rack. Cause of the problem: We had a 1746-OB32 Ser A card giving a nice smoke effect from it. On...
Replies
8
Views
2,518
halla26
H
J
AB SLC 500 major fault output?
Is there a simple way to monitor if there is a major fault on the plc. Looking at my systems there is no output to our scada system for a major...
Replies
3
Views
2,510
robo77
R
D
SLC 500 CPU Fault / Faulty Output
Hello everyone! I'm new to this forum, I'm hoping someone may help me out with some SLC 500 problems I have... A client has two similar machines...
Replies
4
Views
8,361
DmpTheKiller
D
Back
Top Bottom