SKAN_INNOVA
Member
good afternoon
anyone knows any document or url to explain how to communicate Rslogix5000 Emulator with Simatic Wincc.
The communication between Rslogix5000 and Rslogix5000 Emulator it's ok. I Go online with the Emulator. Selecting the emulator as communication path and changing the configured CPU.
The problem is when i want to communicate with Wincc. In the Channel diagnosis of Simatic i can see that the communication fail(red cross in the wincc connection).
In Wincc the drier is OK, IP is oK and communication path= 1,0. In Rslogix i don't understand how configure the IP of the emulator. The Real PLC is not connected and i can't find this parameter in the properties of the emulator.
thanks for your help and sorry for my bad english expression.
anyone knows any document or url to explain how to communicate Rslogix5000 Emulator with Simatic Wincc.
The communication between Rslogix5000 and Rslogix5000 Emulator it's ok. I Go online with the Emulator. Selecting the emulator as communication path and changing the configured CPU.
The problem is when i want to communicate with Wincc. In the Channel diagnosis of Simatic i can see that the communication fail(red cross in the wincc connection).
In Wincc the drier is OK, IP is oK and communication path= 1,0. In Rslogix i don't understand how configure the IP of the emulator. The Real PLC is not connected and i can't find this parameter in the properties of the emulator.
thanks for your help and sorry for my bad english expression.