I am communicating with the 1397 drive through a scanport adapter to RIO and controlled by a PLC5.
I cannot find a 'fault' parameter from the drive. I want to be able to log the drive faults in the PLC5.
Obviously I know when the drive is faulted, but I have no indication other than the HIM on the drive itself for what fault #.
Anyone done this before?
Thanks in advance.
I cannot find a 'fault' parameter from the drive. I want to be able to log the drive faults in the PLC5.
Obviously I know when the drive is faulted, but I have no indication other than the HIM on the drive itself for what fault #.
Anyone done this before?
Thanks in advance.