teh Supporting Member T Join Date Nov 2002 Posts 140 May 15, 2012 #1 dear Folks, I current using S7300 PLC and would like to link with LONWorks Protocol.. How to map up with it? Is using BacNet? Does any one could hlpe me on this? Regards
dear Folks, I current using S7300 PLC and would like to link with LONWorks Protocol.. How to map up with it? Is using BacNet? Does any one could hlpe me on this? Regards
Pudden Member P Join Date Feb 2009 Location Halmstad Posts 179 May 21, 2012 #2 Hi, Assuming that the S7300 uses profibus, I think that the only option is to use a gateway, such as: http://www.anybus.com/support/support.asp?PID=188&ProdType=Anybus X-gateway Patrick L
Hi, Assuming that the S7300 uses profibus, I think that the only option is to use a gateway, such as: http://www.anybus.com/support/support.asp?PID=188&ProdType=Anybus X-gateway Patrick L
Pudden Member P Join Date Feb 2009 Location Halmstad Posts 179 May 21, 2012 #3 Ohh and I forgot to mention, when reading a snvt (Lonworks variable) with a gateway you will need to "de-code" it to something usefull such as Celcius, bar or whatever you need to read. Let me know if you need info on how to do that. //Patrick L
Ohh and I forgot to mention, when reading a snvt (Lonworks variable) with a gateway you will need to "de-code" it to something usefull such as Celcius, bar or whatever you need to read. Let me know if you need info on how to do that. //Patrick L