Zelio Soft 2

nicknzj

Member
N
Join Date
Apr 2012
Location
kampar
Posts
17
Hi all,

Can anyone please to answer my question below?

Im wrting a program with Zelio Soft 2 Ver4.5 in Ladder, i can display the Preset Timer and Current Timer value as:
Preset = 00.00
Current = 00.00

But when i use FBD to display a timer, the format like below:
Preset = +00000
Current = +00000

My question is, can i display the Ladder format when using FBD ?
 

Similar Topics

A
Make shift register with Zelio Soft 2 for Smart Relay Zelio Logic.
Good afternoon colleagues, a pleasure to greet you. In this opportunity I require some help from you. I am trying to make a shift register in...
Replies
2
Views
2,201
kallileo
K
K
Zelio soft laddet rising edge.
Helllo, I am programming ZELIO SOFT in Ladder. I'am looking for a rerisingvedge. i want a SET coil to be set Whem a digital input goes from...
Replies
1
Views
3,144
Lare
L
chud
Zelio soft 2 and Windows 8
Really sorry for bringing this up as I know people have asked this site to death for windows7 64 bit driver. Does the windows 7 64 bit driver...
Replies
5
Views
6,773
motordata
M
G
Schneider SR2B201B Zelio soft 2 question
I'm not familiar with this software at all. I have most of the ladder logic working except for the fact that I need two pumps to alternate, or...
Replies
6
Views
4,352
Lancie1
Lancie1
M
zelio soft PLC set & reset
hi i am new to Scheider electric PLC, i wrote a simple traffic light progamme using three LED's. i used set and reset to turn on and off my LED's...
Replies
5
Views
4,088
jrwb4gbm
J
Back
Top Bottom