Panelview 1000e to Micrologix 1200?

matt_zzz

Member
M
Join Date
Feb 2010
Location
brisbane
Posts
6
Hey Guys,

Work is a little slow and I have a project to control I would like to nut out hopefully... but these are the parts I have though I don’t think the Panelview 1000e screens talk to the MicroLogix processor only the SLC family?

AB Panelview 1000e (2711E-T10C6) “controlnet”
3 maybe working 1761-NET-AIC interface units
Couple of Micrologix 1200 (1762-L24BWA)

Is there a way I can get these to talk by some means (cheaply) and roughly where to start if possible to configure such a setup.

Many thanks, Matt..
 

Similar Topics

F
Panelview 1000e to Control logix DHRIO Card
All, This is my first time test and attempting to establish a DHRIO connection in my career, I am attempting to upgrade the main processor in the...
Replies
3
Views
1,393
Mickey
Mickey
R
Uploading / downloading from PanelView 1000e?
Hi, It's my first time trying to use panel view, although I've touched briefly on RSLogix. I'm struggling to connect to the panel view. When I...
Replies
4
Views
2,297
russg
R
M
Panelview 1000e, rio tag for long interger.
Panelview 1000e, rio tag for long interger. Need to have a f file in the plc 5 read the same on the panelview screen. Did a copy f8;1 to n7:100...
Replies
0
Views
2,228
mykeeplace
M
A
how to communcate with panelview 1000e?
hi everyone,I have a question.I have a contrologix L5555 cpu in local chassis,there have other chassis too,in a remote chassis have a 1756-dhrio...
Replies
0
Views
1,442
alfredxa
A
J
SLC 500 to Panelview 1000e
I have a panelview 1000e that I'm trying to connect to a SLC 5/04.I'm using DH+ for the communications to the Panelview with rs232 going between...
Replies
6
Views
9,863
Ken Roach
Ken Roach
Back
Top Bottom