1747-BSN, 1794-ASB and 1794-OB32P issue

Hi,

I am new to 1747-BSN, 1794-ASB and the rest of its module. I have all the manuals and yet I just could not work the whole thing out. I am using SLC 5/04 with 2 units 1747-BSN module, communicate with RIO 1794-ASB with 2 units of 1794-IB32, 1 unit of 1794-OB32P, 1 unit of 1794-OB8 and 1 unit of 1794-IE8.
I am using standard-32 addressing mode,thus, dip switch S2-3 and S2-4 are at OFF position. I configured G-File as shown below, for both 1747-BSN :

Logical Rack 0 - Full Rack
Logical Rack 1 - 1/4 Rack

I am now able to read the DI from both 1794-IB32 but no luck with simulating the DO to the 1794-OB32P and 1794-OB8. I do not know how to read the AI from 1794-IE8 as well. I attempted to swap the modules but I am still ended up with the same problem.

Any advice is appreciated, thank you in advance..

It is working for the DO already, it was just due to the fact that I am using two units of BSN..So, I have to simulate both O:1.X and O:2.X to 1 instead of just either one.. Thanks.. And now have to work on the analog input, using M0 and M1 files..