About the Micrologix1200 of an question

zhoudq

Member
Z
Join Date
Jul 2011
Location
JiangSu Province
Posts
75
Hello veryone,I have a project for the rull up door. I choose the micrologix1200---1762-L40BWA. Have an encoder in the rull up door motor, the power is 24V DC,I wired to the 1762-L40BWA--I:0/0(this point is fast input),but I no used the HSL instruction experience,please give me some advice, an example or the datum,thank you!
 

Similar Topics

M
MicroLogix1200 edit question
I'm sure this has been asked and that it's not possible but I need to ask. I have two identical machines both with1200R micrologix plc's. If I...
Replies
2
Views
2,366
Tharon
T
L
Remote display for timers on micrologix1200
I have a micrologix 1200 that will run one of three different timing sequence, depending on which input is triggered. I'm trying to find the best...
Replies
6
Views
3,454
GaryS
G
A
Micrologix1200 as an IO device to Citect Scada
How to check the communication between the Micrologix1200 to Citect SCADA. I use PLX51-DF1-ENI router to communicate in scada. I tried to use...
Replies
0
Views
1,342
akosimalakas
A
W
ASCII READ Error 0Eh on Micrologix1200
I have a micrologix 1200 and I am trying to get a barcode scanner to talk to the COM 0 port. I know the scanner baude rate is 9600 because I...
Replies
0
Views
1,769
Wiggum11
W
S
Hooking Up MAC Bullet Valve To MicroLogix1200
Good day all. I have a some MAC bullet valve catrtidges (BV210A-CA1-00-BEH0-CTC). They control vacuum for suction cups that pick up various...
Replies
0
Views
1,610
SirCharles1
S
Back
Top Bottom