Siemens CP143 (6GK1143-0AA01)

The_Harlequin

Member
Join Date
Feb 2011
Location
Europe
Posts
30
Hello!
Does this module need any supply card for the 15V? 15v fault lit and there is no voltage in the AUI port. I don't find any manual on this card so I hope that someone know this.
 

Similar Topics

Hi, I would like to find the procedure to setup PCLink2 (ISA card in PC) to communicate with Siemens CP143. I know that this card is very old...
Replies
6
Views
3,590
OK. You guys helped me out a bunch with my first Siemens question. I found a bunch of issues with integrity checking the PLC programs I was...
Replies
3
Views
112
Hi, I have a 1214 on ip 192.168.0.100. This is connected to other modules through a switch on same network. I need to connect this to a company...
Replies
1
Views
95
Hello. I appreciate the insights here and the willingness to share. I've got a lot of Rockwell experience, but my Siemens experience is...
Replies
6
Views
132
Kindly, has anyone tried to control Lenze servomotors with Siemens S120 drives ? Any special hints ? Have some concerns for the resolver and servo...
Replies
5
Views
178
Back
Top Bottom