How to replace the code if PLC in overseas client side?

jennen

Member
J
Join Date
Jul 2012
Location
Taichung
Posts
1
I am using Panasonic FP0R PLC, and sell machines to the customer in overseas .
If there some bugs in my PLC code, then have to replace it by new correct code.
I don't want the way by any hardware, and don't want send the source code to my customer, but compiled code is okay.
I have ask Panasonic service team half a year ago, but no any reply so far.
So I am appreciated if someone can give me a solution.
 
Had a bit of spare time this morning a had a quick scan of the Panasonic website. Have you looked at the FP Memory Loader, AFP8670 Data clear type
AFP8671 Data hold type
 

Similar Topics

A
Replace Backhoff CP6205
We have a Beckhoff CP6201 PC and an EK1100 module communicating with it via EtherCAT in one of our machines. Due to problems with the PC, I want...
Replies
0
Views
70
Angel_1994
A
T
Panelview 550 (with DH+) replace or migrate
Panelview 2711-K5A8. Customer has 6 of these in service connected to SLC 504’s. One has a bad backlight and I need a solution to replace it...
Replies
11
Views
2,253
ThomasGruetter
T
E
Replace relay with sinking output (non)
I’ve got some devices that are triggered by shorting pins to common. There is 24 volts on each pin and right now I am using a relay output card...
Replies
8
Views
2,555
I_Automation
I_Automation
H
Replace SIEMENS CPU S400 by noncompatible CPU
I can't replace cpu S400 416-3XR05-0AB0 BY 416-3ER05-0AB0 in PCS7 Project when using replace object to keep the original configuration in the...
Replies
4
Views
1,501
HRagab
H
A
How to replace RSlogix 500 DCD bit with studio 5000 ladder diagram
How can I achieve the same functionality in Studio 5000? Image 001.png for the old RSLogix500 program Image 002.png for conversion to Studio...
Replies
6
Views
2,516
Taguch84
T
Back
Top Bottom