Chip Maker
Member
(Time to put on your parachute pants and jump into the Way-Back Machine...)
I've searched this forum and tried Google-ing for an answer without luck.
I've inherited several departments in our plant that use Dataliner 20 displays. There are a hand-full of these units that display 'EDIT?' instead of the normal operator messages.
I am trying to determine how these units got into the 'EDIT?' mode when they were already working (powered down in AUTORUN mode). Also, the battery test passes its self test upon power up.
I realize this is a legacy product but hoping this problem jostle's a memory or two of other forum members that may have run into this problem as well.
Thank you!
I've searched this forum and tried Google-ing for an answer without luck.
I've inherited several departments in our plant that use Dataliner 20 displays. There are a hand-full of these units that display 'EDIT?' instead of the normal operator messages.
I am trying to determine how these units got into the 'EDIT?' mode when they were already working (powered down in AUTORUN mode). Also, the battery test passes its self test upon power up.
I realize this is a legacy product but hoping this problem jostle's a memory or two of other forum members that may have run into this problem as well.
Thank you!