Roye Member R Join Date Aug 2012 Location South Carolina Posts 1 Aug 14, 2012 #1 Has anyone had problems with the 4-20mA input failing on the Red Lion PAXP Process Meters?
George Graziano Lifetime Supporting Member G Join Date Jul 2004 Location NY Posts 447 Aug 14, 2012 #2 I am sending 2 out for repair tomorrow. George
steve2000 Member S Join Date Jul 2008 Location york, pa Posts 5 Aug 16, 2012 #3 I am not aware of any failure status. You may remove the wires from terminals #4 and #5 Retighten screws and measure across terminals with an ohm meter. Should read 20 ohm
I am not aware of any failure status. You may remove the wires from terminals #4 and #5 Retighten screws and measure across terminals with an ohm meter. Should read 20 ohm
damiens Member D Join Date Mar 2009 Location Columbus Posts 42 Sep 17, 2015 #4 I'm new to using Red Lion panel meters. I've been impressed by their PAX2 Line.
DLMUK Member D Join Date Jun 2013 Location Southampton Posts 311 Sep 21, 2015 #5 Roye said: Has anyone had problems with the 4-20mA input failing on the Red Lion PAXP Process Meters? Click to expand... yes - I have had it a few times in different setups - never found the cause.
Roye said: Has anyone had problems with the 4-20mA input failing on the Red Lion PAXP Process Meters? Click to expand... yes - I have had it a few times in different setups - never found the cause.