toshiba plc cable

Does anyone have the PLC cable pinout of Toshiba EX20+? The cable I need is the one that goes from the PLC to the RS-232 adapter. Is the same cable as LCD programmer. Cable name: EX2040PRCA

Thanks

EX20 pinout

The cable uses a RJ45 connector on each end. The pinout is
1 to 8 , 2 to 7 , 3 to 6 , 4 to 5 , 5 to 4 , 6 to 3 , 7 to 2 , 8 to 1 . The color code on my cable is gray, brown, yellow, green, red, black, orange, blue.

PLC-----------Interface

1----gray--------8
2----brown-------7
3----yellow-------6
4----green-------5
5----red----------4
6----black--------3
7----orange------2
8----blue---------1

Sid

Thank you!!

How can i plug, from my computer to the plc, if i dont have the rs-232 adapter