goldprospector
Member
I need the CMP function that is standard in a 90-70, but I can not find anything comparable in Versapro for a 90-30.
Is there another name for this function?
Is there another name for this function?
90-70 to 90-30 CMP function
- Thread starter goldprospector
- Start date
Steve Bailey
Lifetime Supporting Member + Moderator
That instruction is not implemented in the 90-30. You'll have to use a combination of a LE and a GE instruction to duplicate it.
goldprospector
Member
OP
never mind...I messed up with this follow-up. I just need to use two rungs of logic instead of the single rung that is available with the CMP.
Last edited:
Similar Topics
Dear Siemens Experts,
Can somebody help me how to convert the ff. code written in S5;
L MB 5
L KF +1
!=F
= M 20.1
***
It's a compare...
Hi,from A/D module i am importing value using FROM and storing it in D10 register,Next i want to compare it with fix value of 400.But in CMP how...
Situation:
Single [EQU] instruction with single [OTE] on a rung, nothing else/simple. [EQU] operand(A) is a real number data type...
Hi All,
I was wondering what your thoughts are on why Rockwell has this disabled by Default on Series B (Series A this is always enabled I...
I've recently picked up AB again after spending 5 years on Siemens and noticed a frustration immediately with monitoring of CMP (Compare)...