controller faults

kbn_120184

Member
K
Join Date
Aug 2012
Location
usa
Posts
85
hi
i have made graphics in factory talk veiw studio ME now i have to assign controller faults .any one have idea how to assign tags to controller faults .can any one help me how to do .if i have got any fault in controller i have to know it on HMI graphics so i have to connect it with tag r i have to make FBD.
 

Similar Topics

A
Communication Issues between PowerFlex 700 and M580 Controller
Hello, I am currently in the final week of my internship and I have encountered issues with communication between a PowerFlex 700 variable...
Replies
8
Views
226
Lare
L
S
MITSUBISHI ALPHA AL2-24MR-D Controller
Hello! If someone can help me with the following problem. I can't change the phone number. Do I really need the interface (AL-232CAB - Programming...
Replies
0
Views
70
soro4gsm
S
S
Communication not done between Woodward controller and PhoenixIO
I have Woodward Controller EASYGEN-3500XT and Phoenixcontact make IO CAN-CUPLER part no: 2702230, Analog Input card: 2861412, Analog Output Card ...
Replies
0
Views
62
Sandeep Patel
S
A
reading data from siemens controller (profinet) to ethernet/IP controller
Hello I have a s7-1200 and I would like to read the tags present in this controller with my controllogix controller. The two controllers don't use...
Replies
8
Views
249
JesperMP
JesperMP
K
Schneider Modicon Premium TSX P57203Controller issue
Everything was working fine, but suddenly CPU went into error mode, and the ERR and TER LEDs lit up. Now I can't download or connect with the PLC...
Replies
0
Views
87
[email protected]
K
Back
Top Bottom