panelview and plc 5/05

peppin23joe

Member
P
Join Date
Mar 2012
Location
riverside
Posts
59
Hi friends ....

I need your help with a machine where I have installed an Allen Bradley PanelView 6182 - AICZAC where I'm using the internet communication port right through a hub with an Allen Bradley SLC 500 5/05 and I have the following problem.

.. when active the control voltage to switch the PanelView and plc boots correctly but over a minute the program I have in the plc is cleared and the processor is in defautl mode ...

I wonder if someone could guide me in this problem I have with my machine .

I welcome your comments and thank you for your help
 
A PLC loosing it's program can be caused by a bad power supply, lack of surge protection across inductive loads or grounding issues.
 

Similar Topics

K
Remote connection to PLC and remote Upload/Download to PanelView Plus
Hello, I have a machine with a 1756-L72 Controllogix PLC and 1756-EN2T network card, and PanelView Plus 7 HMI. I am using RSLogix V20.05.00...
Replies
12
Views
886
plvlce
P
J
click plc - panelview c300
merry christmas and happy new year i have a click c0-00dr-d and allen bradley 2711c-t3m. can the panelview talk to the click plc via modbus...
Replies
1
Views
213
mikeexplorer
M
M
Connecting a plc-5/30 to a panelview plus 6
Hello all! Can someone shed some light on this? I am trying to connect a PVP 6 to a PLC-5/30 through the serial ports because the old touch...
Replies
2
Views
533
MosesJ
M
K
Adding Duplicate Standard PanelView (not Plus) to SLC 5/04 PLC over DH485
Hello, We have an older machine that has a standard PanelView (2711-T10C3) connected over DH485 to a SLC 5/04 PLC via a 1761-NET-AIC module in...
Replies
1
Views
671
Ken Roach
Ken Roach
D
panelview 1000(2711-T10C1) No PLC Comm
Last night electricians replaced the panelview and now there is no comms between the panelview and the PLC. The processor is a 1747-L541 SLC 5/04...
Replies
4
Views
896
Ken Roach
Ken Roach
Back
Top Bottom