Profibus "Cut-Off Time" in DP Slave

nvrau

Member
N
Join Date
May 2012
Location
Australia
Posts
5
We are looking for an explanation as to how the "Cut-Off Time" field is used on the Parameters TAB of the Properties form for DP Slave.

Here's a screen shot:

profibusdpslavecutoffti.png
 

Similar Topics

S
I want to know which station is cut off the power from it , in PROFIBUS network?
I want to know which station is cut off the power from it , in PROFIBUS network? with mention ,I have connected three CPU313C-2DP together , when...
Replies
2
Views
2,538
shaker Hosain
S
U
Using 2 cables on a Profibus connector
Hi, I was noticing that Profibus connectors have 2 ports on them that can house 2 separate cables. Can I use 2 cables with Profibus signals...
Replies
4
Views
174
Ken Moore
Ken Moore
U
Setting up WAGO PFC 200 750-8216 as a Profibus Slave
Hello, I am in possession of a WAGO PFC 200 750-8216 which I was successfully able to set up as a Modbus RTU Master to a slave device using...
Replies
0
Views
76
udit_91
U
A
Component selection and Implementation of Profibus
I am trying to implement a profibus network and am a newbie in the automation and communication industry. what are the components required for the...
Replies
1
Views
101
mk42
M
R
S7 Device Proxy Profibus Diagnostics
Hi, I am using TIA Portal V18. I have imported a (v5.7) SIMATIC manager project via device proxy. I have created a HMI project (TP700) in TIA...
Replies
2
Views
311
mk42
M
Back
Top Bottom