IO monitor for melsecnet

sttchui

Member
S
Join Date
Mar 2008
Location
kl
Posts
81
HI

Anyone can explain how the melsecnet can monitor the other station IO, & trigger an out output
eg.

Network work 1

Station 1
CPU02H
QJ71BR11
QX41
QY41P

Station 2
CPU02H
QJ71BR11
QX41
QY41P

Station 3
CPU02H
QJ71BR11
QX41
QY41P

Station 4
CPU02H
QJ71BR11
QX41
QY41P

Station 5
CPU02H
QJ71BR11
QX41
QY41P

How to configure the melsecnet if i wanted to monitor the IO from station 5 & trigger an output in station 4???
 

Similar Topics

P
Factory Talk SE quad monitor closing the wrong header screen when navigating screens
We have a quad monitor setup with FT SE and we are utilizing a header screen at the top of every display. when we open a new page we abort the...
Replies
0
Views
93
Pjohnny17
P
S
PC monitor addition to omron PLC.
Our plant manger/my boss wants each line to display the takt time above the line. I am trying to research the cheapest way to do this. Our plant...
Replies
3
Views
187
yasirkhi
Y
C
Can't monitor a S7-300 on TIA Portal V15
Hi Folks, Looking for support and ideas. We are trying to go online to monitor/fault find on an S7-300 programmed with TIA Portal V15. I can...
Replies
9
Views
351
Col J Mal
C
croakus
Re-purpose a Cognex Sensorview monitor
We finally replaced our Cognex Checker with an IV-3 and I'm wondering if can replace the s/w in the monitor with anything else. I haven't been...
Replies
0
Views
100
croakus
croakus
T
1734-vhc speed monitor
Im very new to programmin,but i was wanting to try and set up a program that could monitor the speed of a roller. Would it be possible to use the...
Replies
4
Views
157
Tsmith1823
T
Back
Top Bottom