Possible to go from 230/3/60 to 230/1/60?
- Thread starter matlark
- Start date
bernie_carlton
Lifetime Supporting Member + Moderator
Simple, just hook up between only 2 phase leads. It fulfills what you wrote but I'm sure that's not what you meant.
OkiePC
Lifetime Supporting Member
I am with Bernie. Remove a phase and you have it...but that's probably not the whole story.
Yes.
bernie_carlton
Lifetime Supporting Member + Moderator
Is this the same application in your thread which you started March 12th of this year?
Similar Topics
Hello All,
I need the ability to remotely reboot a Red Lion CR3000 HMI. Due to some graphics issues when the database is updated the HMI must be...
Hello
The plant is running and there is no shutdown nowadays therefore I can add 1734- AENTR and its card while PLC is in Run?
I do not wanna...
Folks,
I have a client with an old ABB Advant / MOD300 system (v14.4). Around y2k I installed the ABB Industrial IT MOD300 OPC Server 1.1/2...
Hi all so i have a robot project im working on were i need to set the layers. using the hmi screen i would like to use the numeric data display to...
I have a FactoryTalk View Se project, Is it possible to export Direct Reference tags to edit in a CSV file or Excel?
I know I can export HMI...
