PDA

View Full Version : rs232 <=> EC-40HRP


hjvl
March 9th, 2004, 09:23 AM
Hi there,

I need the cable layout between a Hitachi EC-40hrp and a pc in order to be able to program the plc.

Can anyone help me with this?

The EC-40hrp uses an 8 pins mini din for the connection.

rgrds,
Jeroen

Ed01
March 9th, 2004, 01:05 PM
Hi Jeroen,

Here is the pin lay-out for the Hitachi EC program cable.


Best regards,


Ed

hjvl
March 11th, 2004, 06:47 AM
thanks!!

hjvl
March 12th, 2004, 07:07 AM
Aaarg,
I now have an other problem!
The software complains that it connot set the pgmj-r in program mode.
The litle switch is on prg.
Do i have to place a loop someware?
Can anyone help me whit this, please?

Ed01
March 12th, 2004, 07:48 AM
Hi Jeroen,


The switch must be in the com2 position.


Best regards,


Ed