hjvl Member H Join Date Mar 2004 Posts 3 Mar 9, 2004 #1 Hi there, I need the cable layout between a Hitachi EC-40hrp and a pc in order to be able to program the plc. Can anyone help me with this? The EC-40hrp uses an 8 pins mini din for the connection. rgrds, Jeroen
Hi there, I need the cable layout between a Hitachi EC-40hrp and a pc in order to be able to program the plc. Can anyone help me with this? The EC-40hrp uses an 8 pins mini din for the connection. rgrds, Jeroen
Ed01 Member Join Date Jul 2002 Location Alphen aan den Rijn Posts 58 Mar 9, 2004 #2 Hi Jeroen, Here is the pin lay-out for the Hitachi EC program cable. Best regards, Ed
hjvl Member OP H Join Date Mar 2004 Posts 3 Mar 12, 2004 #4 Aaarg, I now have an other problem! The software complains that it connot set the pgmj-r in program mode. The litle switch is on prg. Do i have to place a loop someware? Can anyone help me whit this, please?
Aaarg, I now have an other problem! The software complains that it connot set the pgmj-r in program mode. The litle switch is on prg. Do i have to place a loop someware? Can anyone help me whit this, please?
Ed01 Member Join Date Jul 2002 Location Alphen aan den Rijn Posts 58 Mar 12, 2004 #5 Hi Jeroen, The switch must be in the com2 position. Best regards, Ed