jackhenkel
Member
What exactly does this module do?
7264 ssi interface module
- Thread starter jackhenkel
- Start date
TConnolly
Lifetime Supporting Member
SSI stands for synchronous serial interface.
It is typically used for encoder inputs.
One common type is MDT type cylinder position sensors.
Info on the module: http://amci.com/plc-modules/plcmodules-controllogix-ssi-interface.asp
It is typically used for encoder inputs.
One common type is MDT type cylinder position sensors.
Info on the module: http://amci.com/plc-modules/plcmodules-controllogix-ssi-interface.asp
jackhenkel
Member
OP
thankyou.
Similar Topics
Hi all,
I have an application coming up where I have a motor that runs forward or backward to adjust the linear position of a machine component...
I have an application where I need a single SSI encoder to connect to both a safety controller (SICK Flexi Soft) and a general-purpose PLC...
I'm being asked to bid a control system using Siemens S7-1500 controllers, which I don't have any experience with.
The digital, analog, and...
Hey Guys,
I am trying to use an SSI encoder for the first time and having problems getting any data from it.
I am using a 1738-SSIM23 Armorblock...
hi.
i have a AB PLC5 communicating to a Control Techniques Unidrive SP via MODBUS. the Unidrive is connected to an absolute encoder via SSI.
the...