Help converting GE Fanuc LM90-30 v4 to ME

dpjkw · Nov 5, 2012

We have an old machine with a GE Fanuc 90-30. We need to reload the program, I have an original on floppy that was made using LM90-30 V4. Our old PC that had all our DOS software on it died several years ago, and I can't find the floppies (I do still have the SN) and all I now have is Machine Edition. According to GE the pre V6 has to first be converted to a post V6 then it can be imported into ME. Can anyone assist? Thanks, Jim

RussB · Nov 5, 2012

dpjkw said:
We have an old machine with a GE Fanuc 90-30. We need to reload the program, I have an original on floppy that was made using LM90-30 V4. Our old PC that had all our DOS software on it died several years ago, and I can't find the floppies (I do still have the SN) and all I now have is Machine Edition. According to GE the pre V6 has to first be converted to a post V6 then it can be imported into ME. Can anyone assist? Thanks, Jim

Zip the version 4 files and post here, someone will bring them up to date for you. If no one beats me I can do it tomorrow around noon, if all goes well.

dpjkw · Nov 6, 2012

Thank you, I have posted the ZIP file. I'm currently using ME V6.

sjohnson · Nov 6, 2012

Here is the Project convert. I converted it using ME 5.6 so you should be able to open it. Just open ME File Restore Project and locate the zip.

dpjkw · Nov 6, 2012

Thank you I'll try when I get in.

Help converting GE Fanuc LM90-30 v4 to ME

dpjkw

Member

RussB

Lifetime Supporting Member

dpjkw

Member

sjohnson

Lifetime Supporting Member

dpjkw

Member

Similar Topics