Guest
Guest
G
I have 5 SCL 5/03s not networked to each other but each is connected to a PV100 using DH485. And 2 PLC 5s not networked to each other but communicating to their own PV900 over DH+.
I need to network all PLC to an RSView station. I know I can create 2 networks one DH485 with 1747-AIC cards and the DH+ network is simple.
My question is there a way to get all PLCs on Ethernet? What hardware do I need for the SLCs and PLC5s. I do not want to change the processors to 5/05. I know no solution will be cheap but if it is better I think I spend the money.
Thanks all
I need to network all PLC to an RSView station. I know I can create 2 networks one DH485 with 1747-AIC cards and the DH+ network is simple.
My question is there a way to get all PLCs on Ethernet? What hardware do I need for the SLCs and PLC5s. I do not want to change the processors to 5/05. I know no solution will be cheap but if it is better I think I spend the money.
Thanks all