SNMP requests with M340/ Unity pro

RomMR

Member
Join Date
Sep 2012
Location
Porto
Posts
1
Hello everyone
In this moment I am working with a M340 PLC, and the Unity Pro S.
I want to read data from an Power Equipment (Emerson ACU+), using SNMP. Such as temperature, battery, voltage, current, capacity and other requests.

I want know if it is possible to do this, and how I could do this. I know someone already asked this question, but I appreciate any additional information.

Thanks in advance, best regards
Romeu Ribeiro
 
Sir,

One way to accomplish SNMP is through an OPC server that offers SNMP capabilities. KepserverEX offers an SNMP driver suite by which you manage your networked devices.

More information is available through the following link:

http://www.eternity-sales.com/Kepware/snmp.htm

You are able to download the software and work with a fully functional version with a 2 hour run restriction.

http://www.eternity-sales.com/Kepware/kepwaredownloads.htm

Disclosure - ESI is a Kepware Distributor.

Hope this helps.

Shalom and God Bless,
 

Similar Topics

Hi all, Anyone know how to access PLC Omron data memory Using SNMP? I use CJ1M-EIP21 for SNMP communication, but don't have MIB or OID file to...
Replies
0
Views
656
Hello all. I have searched and it seems possible but I am still not sure how to go about this. We have a chassis that has an en2t card and I...
Replies
6
Views
1,884
Hello, Where can I find/generate the MIB file for the SNMP agent in the M241 series in the SoMachine v4.3 ? Have anyone used the SNMP agent to...
Replies
0
Views
1,064
I'm trying to figure out if it's possible for an EN2T card along with an L7x processor be used to send SNMP protocol messages? I'm pretty sure the...
Replies
4
Views
3,827
I have a Panelview model 2711-T5A20L1 that the IT Dept. tells me has SNMP Protocol is active. They want it turned off. Is it possible, does the...
Replies
2
Views
1,503
Back
Top Bottom