Russ
Lifetime Supporting Member
this weekend we added an Ethernet card to the rack. Both of the DH+ channels, A and B, appear to be working, however, when I plug my dh+ cable into the 8 pin port I cannot see the plc, the network, nor the hmi (a panelview 550).
both the A and B comm indicator lights are on and both solid. I looked at the plc's channel config, and adjusted linx accordingly, but am getting nowhere.
I need to download a revised hmi app to the 550, but can't see it.
the plc can't be shut down.
Any ideas?
both the A and B comm indicator lights are on and both solid. I looked at the plc's channel config, and adjusted linx accordingly, but am getting nowhere.
I need to download a revised hmi app to the 550, but can't see it.
the plc can't be shut down.
Any ideas?