PDA

View Full Version : DXF to MC-code


seppoalanen
March 13th, 2004, 12:46 AM
Have somone know application from dxf-drawing to MC-program-(G)code for Omron MC-421 servo-controller. I have to do very big (4.000x16.000mm) 'plotter' where 'pen' is replaced by milling cutter.

Othervice I can do program who translate HPGL-code to MC-code, but it takes time. Direct translation from DWG or DXF could be too difficult becourse there are too much 'moving parts'.