Abb - acs850 vfd

gowrisankarm

Member
Join Date
Dec 2012
Location
Coimbatore
Posts
1
Hello,
Can the 'X7'port of ABB-ACS850 VFD(Port to connect control panel or PC) be used to connect with PLC system through 'MODBUS TCP/IP' protocol...?

Regards,

Gowri.
 

Similar Topics

I am developing a ControlLogix system. For the VFD I am using an ABB ACS850 VFD. I am planning on controlling the VFD on Ethernet/IP using a...
Replies
0
Views
2,625
Hi all, It is my first time using a VFD. The drive is connected to a fan which I need to run at variable speeds - ie. accelerate to a desired RPM...
Replies
8
Views
3,180
Has anyone had experience interfacing with serial comms a FX3u and ABB ACS850's drives?
Replies
0
Views
2,177
Hello all, I have an ABB PLC (PM573) and it has without MC card. I need to take backup from PLC to PC (in automation builder v2.7 ). My...
Replies
8
Views
205
Folks, I have a client with an old ABB Advant / MOD300 system (v14.4). Around y2k I installed the ABB Industrial IT MOD300 OPC Server 1.1/2...
Replies
0
Views
65
Back
Top Bottom