hi, i m doing project on siemens s7-200 (cpu-212).micro/win, the programing software currently communicating with PC/PPI cable.
for SCADA, i m using WinCC(version-4.01) which i programmed for pc adapter(MPI).WinCC do not support PC/PPI protocol.
now,plc can be programmed for MPI.so, what hardware i require so that SCADA also communicate.
also, plz. explain me how it will work.also some related links if possible.
thanx......
for SCADA, i m using WinCC(version-4.01) which i programmed for pc adapter(MPI).WinCC do not support PC/PPI protocol.
now,plc can be programmed for MPI.so, what hardware i require so that SCADA also communicate.
also, plz. explain me how it will work.also some related links if possible.
thanx......