I am working with a taylor-walts plc. I was using a G2-2 Series Interbus-S 9 pin Sub-d version for the valve pack. They do not have those anymore on the marker. The closest that I found and they seem pretty simi lar is a G2-2 Series Interbus-S M23 Version. I did the transition of the cable from 9 pin Sub-d to M23. Everything works as far as the hardware. I have a issue with the drive initialization. It keeps faulting to initialize the drive. That goes to the Interbus.ini file. Does anybody know what chenges I have to make on that .ini file, or what do I have to do for a succesfull initialization?