DF1 Comms to Microlink Radio Transmitter

YoungWint

Member
Join Date
Dec 2012
Location
East Midlands
Posts
77
Hi All

Was wondering if any one out there has any experience of using DF1 comms with a Churchill microlink radio transmitter, used for telemetry.

What I would like to know is how to configure the comms port?
Should I configure link as Master or Slave?
Where do I put my data in a compactlogix?

Any info would be greatly appreciated.

Thanks
 

Similar Topics

I'm trying to convert an old panelview 600 application to the 800 and I'd like to keep the current serial comms configuration instead of adding...
Replies
1
Views
563
Micro 800 series to AB 1400 Series communication Communicating over DF1 Radio modem (using 870E with DF1) Using the CIPGENERIC instruction. To...
Replies
0
Views
773
I no longer have an option to select df1 path and was wondering if anyone has ran across this. I can configure in RSLinx Classic and see the PLC...
Replies
7
Views
2,017
I am having trouble with communication between my micrologix 1000 and my magelis HMIGTO5310 touchscreen i have added the allen bradley df1 driver...
Replies
0
Views
1,479
Hi everyone. Not sure if this has been asked before but I could not find anything in the search. I have a PVP1000 connected via DF1 to 1 ML1500...
Replies
1
Views
2,782
Back
Top Bottom