Network structure and data exchange diagram ?

nqchanh

Member
N
Join Date
Dec 2012
Location
Ho Chi Minh city, in Viet Nam
Posts
15
i've got an assignment as follow:
+show network structure of Siemens PLCs
+if there are two PLCs connected throught MPI network, explain the communication by using the data exchange diagram the content of MW0 between two PLCs
i hope sonemoe can help me ! thanks !^~^
 

Similar Topics

M
SCADA network extension to remote sites
So I'm pretty new around here but I come looking for advice or suggestions to research. Im the plant electrician/SCADA guy for a warer department...
Replies
2
Views
41
Old Man
O
mad4x4
Network Switch supplier USA
Looking for a supplier of Layer 3 Network Switches DIN RAIL MOUNT, in Alabama, In the UK we would use Typically in the UK we would use...
Replies
5
Views
119
Ken Moore
Ken Moore
mad4x4
Scalance Ring NEtwork
We are having an issue with some servers, with "Teamed NICs" is we plug one cable leg of the team into one switch and the other to another...
Replies
0
Views
56
mad4x4
mad4x4
Rsflipflop256
Setting up a modbus network on a DL262 Directlogic PLC with Siemens LMV 3 Burner controllers as slaves, eight of them, with OCI 412.10 Interface
Good morning fellow sea captains and wizards, I am being asked to do the above and obtain 4 values from each slave, I know about the MRX and MWX...
2
Replies
27
Views
630
Rsflipflop256
Rsflipflop256
P
RSLinx Classic Network Dropout
Hi, I am working on a project, where I face a issue with respected to Network Dropout. The PLC is connected to a 16 port unmanaged switch, where...
Replies
7
Views
183
TheWaterboy
TheWaterboy
Back
Top Bottom