Danfoss FC302-P45K supports Modbus-TCP ??
- Thread starter sahebanna
- Start date
danw
Lifetime Supporting Member
Why don't you check the drive's electronic pdf manual by searching for the term Modbus and see what the search brings up?
Hi Sahebanna!
As DanW said, it's always a good idea to read the design guide:
Design Guide
But, Yes the FC302 supports Modbus TCP!
Order your drive with the MCA122 option and you'll have Modbut TCP. As a side note it supports Modbus RTU as standard.
Best regards,
Michal_dk
As DanW said, it's always a good idea to read the design guide:
Design Guide
But, Yes the FC302 supports Modbus TCP!
Order your drive with the MCA122 option and you'll have Modbut TCP. As a side note it supports Modbus RTU as standard.
Best regards,
Michal_dk
Similar Topics
Hello!
First post here!
Trying to commission a Danfoss FC302 frequency converter (with option A MCA121 EthernetIP-card) connected to ABB AC800M...
Im working with Danfoss fc302, i got a simple problem inyet icant fixed it, can you help me, we had several drive in our project, to be able...
Hello,
At the company where I'm working for they have standard FB's for controlling FC302 drives.
When we do not have a signal to the PLC from...
Hi,
I have a small danfoss FC302 VSD giving a Mech brake low [A63] alarm once or twice a day for some reason. There is no brake and the only I/O...
Hello,
I'm using a Danfoss drive FC302 connect via profidrive to a Siemens PLC 315.
My problem is how can I read from the drive a current upper...