read negative temperature value
- Thread starter dag82
- Start date
With correct configuration, the 331-7SF00 will provide a temprature readout of T x 10^-1.
There's no special setting to read out negative values. If your TC can measure em and the config is done correct, the specified PIW will have the correct value as an Integer.
There's no special setting to read out negative values. If your TC can measure em and the config is done correct, the specified PIW will have the correct value as an Integer.
Similar Topics
Hi,
The hardware is: Click Plc model # CO-O1DD1-O HMI model # S3ML-R magnetic-inductive flow meter model # FMM100-1001.
I will set the flow meter...
Is there a way to use the FAL instruction to do +=2 instead of +=1? I have an array that is organized with alternating "data" and "flag" values...
Hi everyone
i have a customer, who wants to show an alarm on the machine, if the I/O forces are enabled and set, on at ControlLogix L81E with...
Hi
Iam using monitouch hmi(V9 soft) with omron plc cj2m (CX programmer).
In this I want to read a data from hmi to plc.
The data was like...
Hi everyone.
Quick questions.
On UnityPro,
I want to open and quickly read tags from a .STA files witouth opening the program.
I have 30 plc...