PV550 2711-K5A8 communication with PC

Miroslaw

Member
M
Join Date
Feb 2013
Location
AAlesund
Posts
1
Hello!
Communication setup of the PV550(2711-K5A8) under configuration mode looks like: DH+/node2/Br57.6

I use 1747-UIC interface, 2711-NC13 cable and RS232 serial port of the PV550. On the back side thers is also 3pin DH+ port.
Printer is disabled.
What drivers and configuratin should I use in RSlinx? and generally how to get communication with my PC?
o_O
 

Similar Topics

O
PV550 2711-K5A9L1 problem to connect.
Good evening/day... I have a PV550 ( 2711k5a9L1 - frn 4.11) and i have a several problems with connections between panel and PC ( pc have a com...
Replies
5
Views
4,977
Mickey
Mickey
S
PV550 add a stop
Is there a way to add a stop to the attached program? I want to stop it after the first rinse so the operator would have to push a button for it...
Replies
10
Views
1,211
sposb
S
J
PV550 612 No Active Nodes Found
I'm trying to connect a PV550 (2711-T5A2L) to a 1761-NET-AIC using a 1747-C11 cable (w/RJ45 removed) and the Phoenix connector. Can someone tell...
Replies
8
Views
2,653
Ken Roach
Ken Roach
mad4x4
Replacing PV550
We have an old machine that has been mothballed since early 2018 and management are looking at more work for it in 2022. The system runs on an SLC...
Replies
12
Views
2,845
plvlce
P
R
Allen Bradley PV550
Trying to write a program for a PV550 (2711-T5A16L1, Ser. B, Rev. E, FRN 4.46) to test the touchscreen. I wrote a program with 16 pages and on...
Replies
2
Views
1,684
RAYBRITO
RAYBRITO
Back
Top Bottom