Grundfos Genibus

Hojland

Member
H
Join Date
Oct 2006
Location
Langå
Posts
203
I trying get the KWh value from a Grundfos MGE motor. It runs with GENIbus. Is there anyone who has done that. How can it be done most easily. Rslogix500 SLC5/05
 

Similar Topics

M
Grundfos CIM500 EIP IP Address Assignment
Hello, I'm not sure if this kind of troubleshooting post is allowed here, but I'm at a loss. I'm trying to configure a Grundfoss CIM 500...
Replies
6
Views
1,764
widelto
widelto
J
Grundfos booster pump skid with CU 352 ethernet card
I have a grundfos Hydro pump skid with a cu 352 ethernet card communicating with an allen bradley 5069 compactlogix controller. I have the aoi in...
Replies
4
Views
2,610
JERA
JERA
I
Modbus Grundfos Pump CIM200 - Problems
Hello, I have to integrate several grundfos pumps with modbus interface CIM200. Firstly i'm using a modbus scanner (modbus poll) to check the...
Replies
0
Views
1,633
iJAF
I
TimD
Grundfos "Geni-Bus" (FieldBus) - Any experiences?
Hello, An engineer associate is proposing we use Gurndfos well water extraction pumps with Grundfos' proprietary controller. I am against this...
Replies
4
Views
3,046
TConnolly
TConnolly
P
Grundfos and Modbus
does anynoe have experiencce communicating with a grundfos G100 using modbus? I'm trying to use an Allen Bradley SLC 505 with a prosoft modbus...
Replies
5
Views
3,814
504bloke
504bloke
Back
Top Bottom