omron cpu43 communication problem with hmi

ranaaffan

Member
R
Join Date
Mar 2013
Location
pakistan
Posts
6
hi
we have omron C200 HG CPU 43. The problem is, it is not communicating with HMI while it is communicating with laptop on same port.
Also its communication LED is ON without connecting any cabel.
please help,how do i communicate it with HMI.
 

Similar Topics

R
omron cpu43 communication problem
we have omron C200 HG CPU 43. The problem is, it is not communicating with HMI while it is communicating with laptop on same port. Also its...
Replies
6
Views
3,026
ranaaffan
R
V
Omron CS1G- Cpu43
Hello, I am fairly new to PLCs and have little experience with them so I thought if anyone here could help it would be great. The project that I...
Replies
1
Views
2,347
gclshortt
gclshortt
M
Omron CS1G-CPU43 cx-programmer
I am new to cx-programmer and I'm trying to create a simple programm to begin with. I have one input and one output digital module and one output...
Replies
2
Views
1,783
Mike31
M
G
Problem with connection to an old CPU200HG CPU43 omron CPU
Hi, I need your help if it possibe. I have an old omron CPU C200HG CPU43 and I am trying to connect to it with my PC though serial 9-pin cable...
2
Replies
21
Views
7,638
_Woody_
_Woody_
I
omron cj2m with scada comunication
I have an old plc in the system I have, moxa nport was used to communicate with scada, I want to replace the plc with cj2m cpu33 and eliminate...
Replies
1
Views
33
IO_Rack
IO_Rack
Back
Top Bottom