Rotork IQ on Siemens S7300

YoungWint

Member
Y
Join Date
Dec 2012
Location
East Midlands
Posts
77
We are currently using a number of Rotork IQ valves on a project.

The client has a requirement to send/ receive acyclic data from the PLC.

This is to take place on Siemens Platform.

Could you advise how this achieved in terms of Data receive/ transmit. An example would be extremely helpful.

Thanks in anticipation of answers.

Young Wint
 

Similar Topics

S
Rotork Valve (Profibus) Acyclic data development using siemens S7
Hi all, I could use a little bit of help. I am currently developing a standard block for a Rotork valve which is to communicate to a S7-300 PLC...
Replies
4
Views
1,954
Shane O Sullivan
S
K
Siemens S7-400 PLC & Rotork Profibus Communication
Hi, I am trying to get communication between Siemens S7 400 CPU & Rotork actuator. I have already installed GSD file in HW config and downloaded...
Replies
0
Views
4,016
kyawhtay
K
R
Rotork Actuator MK3 Simple Dual Channel Profibus Communication With GE Fanuc 90-30
Dear All, I am trying to communicate between GE Fanuc PBM101 profibus master and Rotork actuator simple dual channel type module. I have used...
Replies
1
Views
1,623
rahilansari
R
Saturn_Europa
Rotork IQ Pocket Insight
Has anyone ever used a PDA to download configurations using IR from the IQ series of Rotork valve actuators? The software is downloadable from...
Replies
0
Views
1,809
Saturn_Europa
Saturn_Europa
N
4-20mA signal unstable voltage and operation on Rotork actuator
I'm fairly new to the world of PLC's. So far I've managed to resolve the problems I've crossed but this one has me stumped. I've got a Rotork...
Replies
6
Views
3,848
danw
danw
Back
Top Bottom