AB Stepper and Balance Control

PortmanBlue

Member
P
Join Date
Dec 2010
Location
Australia
Posts
14
Hi, I have an application in which I need to communicate with four balances over RS232C, control four stepper motors and communicate with a PanelView Plus. At this point I am considering a CompactLogix L32E connecting to the PanelView Plus via ethernet, with two 1769-ASCII modules to allow for balance communication and four AMCI 3601 stepper modules for stepper control. However I am unsure if the AMCI modules are available in Australia.

Is anyone able to to suggest suitable Allen Bradley products which could fulfil the requirements?
 

Similar Topics

T
Micro850, Stepper Drives, and you
HI everyone! I am trying to use a Micro850 to control a SureStep (Leadshine) Stepper drive (DM805-AI) from Automationdirect. I have no trouble...
Replies
7
Views
181
bkottaras
B
G
How to Calculate Stepper Motor RPM from Encoder Pulses? - TwinCAT Beckhoff
Hi everyone, This is my first time posting, so please forgive any omissions or mistakes. I am attempting to control the velocity of a stepper...
2
Replies
18
Views
998
ndzied1
ndzied1
J
Stepper drive reccomendations
Good Afternoon, I am hoping somebody can advise me on a make/model for a stepper drive. I have a failed ACS drive that worked wonderfully. I am...
Replies
0
Views
696
JoeM3
J
M
Stepper Motor control issues with Micro850 and CCW
I'm controlling an Applied Motion HW23-601D using a Leadshine EM542S connected to a 2080-LC50-48QBB, using CCW, and experiencing some weird...
Replies
2
Views
610
MikeBriggs
M
C
Issues Controlling Stepper Motor Driver with Eaton PLC
Hello. I am using the following: Eaton E4-AC-12RXP PLC I am trying to control the CL86T which controls a Closed-Loop Stepper motor. I am using...
Replies
3
Views
971
celmassry
C
Back
Top Bottom