ML1100 time control

_Mika_

Member
Join Date
Mar 2013
Location
Aveiro
Posts
2
Hi,
I've a school project with a MicroLogix 1100, and I'm using the RSLogix Micro Starter version of the programming software. I've to control the working time, and the dead time of some machines, what is the best way to do this. I pretend to control in hh:mm:ss.

Thanks
 
Last edited:

Similar Topics

I have a ML1100 PLC and a DC motor with a potentiometer mounted to its shaft. I want to demonstrate positional control using a PID loop(no load)...
Replies
3
Views
4,126
I'm looking to implement a low-cost, efficient method of communicating some integer values to an R30iB robot from a Rockwell 1100 PLC. I am not...
Replies
8
Views
1,712
Hello all, I am trying to setup my MicroLogix 1100 as a modbus RTU master for a modbus network containing multiple modbus RTU slaves. I currently...
Replies
7
Views
3,893
We have a machine that keeps losing its program at random intervals; sometimes 2x-3x in a shift, sometimes will go over 1wk without issue. I had a...
Replies
9
Views
2,894
Just asking for clarification here, but from my research all I need is a 500 ohm resistor across the AI and the common? Heres my schematic. I...
Replies
5
Views
2,546
Back
Top Bottom