Connecting AIC+ via UIC1747 with PC

I have to communicate my PC via UIC1747 with AIC+ for some networking task as shown in the following attachment ,I want to confirm the PIC configuration for the 1761-CBL-PM02 (for Port 2, 8-pin DIN of AIC+). Please tell me if my attached pin configuration is correct.Also tell me if there is any series B or series C cables of 1761-CBL-PM02 if yes then please tell me the differences.

Here is a series "B" see PDF.

Note no connection to 24v and pin 9

what series should I use?

As in UIC 1747 manual there is no description of which series cable should use for my communication as in attached picture.so please tell me about that.In UIC 1747 manual only part number of cable is mentioned as in below picture

I would use the series B, you will have to power the AIC from an external source.