Omron CJ1W-TC001

Duxbut

Member
Join Date
Apr 2013
Location
Miinesota
Posts
12
This is a newbie question! I'm trying to monitor 2 temperatures on a machine. Priced out a monitor card for CJ series controller, came out to be over $800.00. Seemed rediculous! Can I just monitor with a temperature controller card? Was told i would get an error not controlling but do't understand why? This card is like half the price!

Thanks for any help!
 
There is no problem monitoring temperature inputs with the TC001 card. I currently have several CJ2 systems with 3 TC001 modules monitoring 12 temperature inputs. The control outputs are not used on any of them. The TC001 is around $600.
 

Similar Topics

I have PLC Omron CJ2M with OD211 module. I want to use the pulse output and PWM output and this module. But i confuse how to activated this, i...
Replies
0
Views
75
Good. ,how to connect the relay outputs to the CJ1W-OC211 card ?
Replies
6
Views
1,145
Hello everyone, I would like advice on the setup below: CJ2M PLC: 192.168.10.01 (Subnet: 255.255.255.0) ETN21 - 192.168.20.1 (Subnet...
Replies
6
Views
1,824
Hello, I have an installation with an omron plc CP1L with a CJ1W-CIF12 module connected to eight omron MX2 drivers. I use the bus to modify the...
Replies
2
Views
2,131
Hello all, has anyone configured before 2 CJ1W-ETN21 in a single rack? I am trying to put 2 units of ETN21 couple with my CJ2M-CPU33 to act like...
Replies
1
Views
1,244
Back
Top Bottom