WinCC Advanced Comms Fail Alarm

Rob.Hill

Member
R
Join Date
Dec 2009
Location
Yorkshire
Posts
47
Hi,

I am wanting to generate an alarm in the HMI if comms to the PLC is interrupted for any reason. I know I can use system diagnostics, but prefer not to (slows compile of PLC, too much info etc.)

I can generate an alarm in the PLC using the area pointer - coordination, but would like something similar in the HMI.

I'm thinking I may need a script, but have little experience with VB.

:)
 

Similar Topics

K
WinCC Flexible 2008 Advanced
Hi, We have upgraded our laptop which includes Windows 11. It appears that WinCC flexible 2008 advanced does not support Windows 11. What...
Replies
11
Views
246
mk42
M
A
wincc advanced RT when connection loss
Dear all, in wincc advanced RT (same as in wincc flexible), when connection to PLC is loss, output field (real) goes to ####. I suppose that tag...
Replies
1
Views
151
JesperMP
JesperMP
A
IP Address Configuration in TIA for WinCC Advanced PC Station
I created a project with Tia portal wincc runtime advanced PC station and also activated its smartserver for some smartclients to connect to it...
Replies
1
Views
300
JesperMP
JesperMP
xzen
TIA Portal WinCC Advanced runtime licence
We are rewriting software for a Simatic PLC/HMI originally made with TIA Portal V16. We will make use of a library that was developed for V17...
Replies
4
Views
1,512
JesperMP
JesperMP
L
Change computer name of a wincc advanced v13
is it possible to change the computer name of a PC with WinCc advanced v13?
Replies
7
Views
2,014
JesperMP
JesperMP
Back
Top Bottom