Mb+

Hi,
I wonder if anyone could explain why, in the attached view of network explorer Proworx32 V2SP2 of the Fugal MB+ network, the two nodes, 80 and 100 appear, ( they have to be some sort of derivative of the real plcs 08 and 10) The network is wired correctly, with the resistors installed at each end.
Comms work fine , would like to know reason. There are 2 BM85s in the circuit one addressed at 26 and one at 4.
Thanks
Steve

Don't know why you are getting the extra PLC's but I'm sure it is something to do with the bridges.
When I use network explorer, it shows the bridges and you can double click them to browse into the next network.

reply from schneider L2

Our L2 support guys suspect that it is related to the BM-85 Modbus Multiplexers and the manner in which the Proworx 32 Network Explorer navigates those units that is causing the duplicate nodes. Although they hadn't actually come across this before.