PLC3 Scanner to PLC5 Adapter

wvmike

Member
W
Join Date
Apr 2004
Posts
1
Does anyone have experience in Setting up an Allen Bradley PLC3 in Scanner Mode and a PlC5 in adapter mode?

Is there a manual specific to this?

I am reprogramming about 600 rungs from a PLC3 processor to a new PLC5-60 and need to pass interlock bits and some other logic.

Any help will be appreciated.

Mike
 

Similar Topics

S
PLC3 DF1 to ControlLogix Gateway
We are replacing a PLC3 with a new ControlLogix. There is an existing mainframe application that communicates with the PLC3 via a 1770-KF2 (DF1...
Replies
1
Views
2,379
Ken Roach
Ken Roach
D
Using IGS (Industrial Gateway Server) with a PLC3
I have an iFIX system to upgrade that has and SLC504 and PLC3 on DH+. The current system uses an ABR driver and RSLinx with a KTX card. We have to...
Replies
0
Views
3,316
DHoward
D
C
PLC3 Day of Week
I am working with an ancient PLC-3 and I want to set a bit based off the day (Wednesday) and time (noon) of the week. I have the following words...
Replies
11
Views
5,930
Brownhat
B
S
Please help; PLC3-10 to RED LION (G3 or Data Station Plus)
It seems simple - doesn't it? :banghead: Perhaps I have been spoiled with Omron? :p A few things I must say before I pose any questions -...
Replies
14
Views
17,101
504bloke
504bloke
S
PLC3 Export error
I receive an "internal error" when exporting a PLC3 program from 6200 s/w. the .txt file contains 13 lines of correctly exported data until it...
Replies
3
Views
2,357
stephenG
S
Back
Top Bottom