Pulse Output instruction for Panasonic FPOR

I am writing my first FPOR program
when you insert a contact select VARIABLE. you will then be able to select the options you seek
 

Similar Topics

L
Read pulses from a magnetic-inductive flow meter and modify pulses by a user inputted valve and to output the modified rate to another pulse reader
Hi, The hardware is: Click Plc model # CO-O1DD1-O HMI model # S3ML-R magnetic-inductive flow meter model # FMM100-1001. I will set the flow meter...
Replies
4
Views
130
Steve Bailey
Steve Bailey
R
Pulse Output PLC Omron CJ2M with CJ1W OD211
I have PLC Omron CJ2M with OD211 module. I want to use the pulse output and PWM output and this module. But i confuse how to activated this, i...
Replies
0
Views
98
rakhafrds30
R
V
Schneider BMXDDO3202K digital output pulse width
I am monitoring two BMXDDO3202K digital outputs for their behaviour, they are each for opening and closing, and so the on time affects how far the...
Replies
1
Views
279
Lare
L
D
RSLogix 500, MicroLogix 1400 Pulse Train Output
Hello, I am using pulse train output to a stepper driver to control a stepper motor. It seems to work fine except when I use a Control Stop...
2
Replies
16
Views
3,321
donp
D
D
Seametrics FT450 pulse output for flow, having issues
Hi all, To make a long and annoying story short, a client has two flowmeters in their water plant and the flowmeter that controls the CL2 dosage...
Replies
6
Views
2,332
drbitboy
drbitboy
Back
Top Bottom