IntouchWonderware Tag update

bayeibrahima

Member
B
Join Date
Sep 2010
Location
DAKAR
Posts
188
Hello
After every cleaning of stocking tanks; the last cleaning date and hour should be monitored but this tag is not updated (the Installer left before finishing his work).
I've made snapshots for tag variables details,Data Change Scripts; etc.. on Windowmaker.
Please can someone tell me what is wrong.
Best regards

NB/ The tag value name is FE1I1_91_52_19

SDC10717.jpg SDC10718.jpg SDC10719.jpg SDC10721.jpg
 

Similar Topics

T
Panel View Tag issue.
I have a German programed ME program. I want to know what tag in the PLC a latched button turns on. However when I open up the tag properties I...
Replies
14
Views
196
bkottaras
B
T
Writing an Array to a flag tag in crimson 3.0
Hi, I'm having an issue in crimson 3.0 when I create a programme using a case statement referencing a fault word that each bit needs to change the...
Replies
4
Views
177
Taintd
T
P
Tag not working in scada application
Has anyone ever seen where you have a tag reading from the plc in scada. In this instance it's just a PEC, I set it up on one scada terminal and...
Replies
0
Views
87
petehannon007
P
E
FTView ME: Can you set CurrentUserHasCode value from a PLC tag?
I want to set user security level based on the value of a tag in my PLC called "ActiveUser". That tag will contain the A-P code which we use for...
Replies
6
Views
207
robertmee
R
Y
Studio 5000 rev33 Tag Data
My current situation is a follows: I have two similar 1769 controllers with similar programs. Both have a UDT array that is being used to store...
Replies
6
Views
237
robertmee
R
Back
Top Bottom