godfrey
Member
If I use Softshop to comm to a TI545, will a USB to serial plus null modem cable work or do I need a native serial port as with TISOFT?
TI545 and a native serial port
- Thread starter godfrey
- Start date
Peter Nachtwey
Member
You should be able to use a USB to serial converter. The TI505 transparent byte protocol ( TBP) is not timing dependent like Modbus RTU is.
Similar Topics
Any old TI545 boys or girls reading this?
Something I never figured out. We have one RS232 serial connection between our PC and the 545 Port 1...
Hey Guys and Gals,
I have some a piece of old equipment that has a TI545 Siemans Processor and it is communicating with a Nematron IWS-2511T touch...
I'm wondering if anyone has any insight into Siemens communications and may be able to help me with a communications problem I'm having?
I have a...
I'm trying unsuccessfully to control a steam regulator for drying cans with a TI545. I'm using WorkShop for programming. When I make a new loop...
Greetings,
I'm currently working on a small project that would benifit from an upgrade to an S7-300 plc. Currently there is a Ti-545 installed...