rick62
Lifetime Supporting Member
i located the sw on the ab site but i get an error. i think because the sw i down loaded is not actived. i could not locate a PCIS comm sw for the slc100 and 150. can anyone help.
1745-pcc com sw
- Thread starter rick62
- Start date
Mickey
Lifetime Supporting Member
Here are some useful links.
http://www.plctalk.net/qanda/showpost.php?p=199773&postcount=9
http://www.plctalk.net/qanda/showpost.php?p=260455&postcount=1
http://www.plctalk.net/qanda/showthread.php?t=37641
http://literature.rockwellautomation.com/idc/groups/literature/documents/um/1745-um001_-en-p.pdf
http://www.plctalk.net/qanda/showpost.php?p=199773&postcount=9
http://www.plctalk.net/qanda/showpost.php?p=260455&postcount=1
http://www.plctalk.net/qanda/showthread.php?t=37641
http://literature.rockwellautomation.com/idc/groups/literature/documents/um/1745-um001_-en-p.pdf
Similar Topics
Hello All,
I am attempting to upload from a SLC 100. I know the controller is good because it is still in operation. I know the programming port...
So I bought a 1745-PCC-USB to replace the old cable. I installed the driver. I went to device manager reset the port to com 1. If I have the wrong...
Looking for a troubleshooting manual for the above PLC controller. So far I have found this one which is of no help...
I have an Allen Bradley SLC150 1745-LP152. What cable and software do I need to be able to download, edit, etc, the program? Is this possible...
Hey Crew,
I know this has been knocked to death but I figure the quickest way to an answer is to ask the question again. I'm looking for a...