question about Simocode address

angi

Member
A
Join Date
Jan 2010
Location
us
Posts
361
Hi guys

I am working on a system with controllogix, prosoft MVI56 profibus module, and Siemense MCC (MM440 VFDs and Simocode Pro motor controllers),I use prosoft PCB to configure the system, for example, one MM440 which address as 3, one Simocode which address as 4. my question is how to physically set the address for MM440 and Simocode in order to match their address in PCB (3 and 4)? I do not have the software Simocode ES.

thanks
 

Similar Topics

S
simple logic question
Hello again..trying something on an existing poorly written program and just wanted to double check something system is an A-B MicroLogix 1200 In...
Replies
5
Views
95
robertmee
R
F
FactoryTalk HMI Question (Recipes)
Good morning! Let me start by saying, I am still learning about this type of HMI programming. I recently watched a video about recipes and how it...
Replies
0
Views
51
Foxtrot2050
F
J
CL 5380 RTC vs Timer.ACC, question
I have some logic that I have written within a 5380 series controller that tracks the time an event is started, while the event is running an RTO...
Replies
2
Views
78
JZerb
J
P
Hello! I have a question about HMI 2711R
I have an HMI 2711R - T4T Series B, and I want to know which PLCs, besides Micro 820, can communicate with it.
Replies
2
Views
80
plc_siamens
P
J
PLC SIMATIC S7 1200 / KOP/SCL question
HI i would like to know how to get a variable that will store the amount of times a program has been executed. The issue is I have 3 DBs for 1 FB...
Replies
2
Views
70
jimix
J
Back
Top Bottom